Panasonic Blu Ray Remote Codes

Another electronic device that you can program into your universal remote control is a Blu Ray. If you have a Panasonic Blu Ray and need the universal remote control code for it, this post is for you. In this post, we list the codes of the Panasonic Blu Ray remote control. The codes appear as 4 and 5 digit numeric codes. To enter the code, simply use the number key on your universal remote control. The reason we add more than one code is for you to try another code if the previous one doesn't work.

Panasonic Blu Ray Remote Codes (5 Digits)

  • 21579
  • 21621
  • 21641
  • 20703
  • 21762
  • 21490
  • 21490
  • 20632

Panasonic Blu Ray remote codes (4 digits)

  • 0715
  • 0716
  • 0740
  • 0733
  • 0820
  • 0821
  • 0862

How to program the universal remote control for Panasonic Blu Ray

Step 1. Turn on your Panasonic Blu-Ray set.

Step 2. Hold the universal remote near the Blu-Ray set you want to program.

Step 3 . Find the "Menu" option on your universal remote. Press "Setting" button and "Program Remote" and then choose "Sound" as the device you want to program. Note that the Menu button appears as a "SetUp" button on some universal remote controls.

Step 4. The little LED light will blink a couple of times at this point. Enter any of the above codes with the number button on the remote control. The little light will turn off once you get the correct code. If not, try the following code until you get the right one.

Step 5. Press any of the function buttons on the remote to see if it works. If it works, Viola, you've programmed your universal remote for your Blu-Ray.

Also read the Philips Blu-Ray universal remote control codes

Universal remote does not work

If your universal remote is not working, it could be the result of some minor issues. This session will point out the problems that can cause your universal remote to stop working and fix it.

. Object: If there is an object obstructing your TV or the device you want to program, your universal remote may not work well. Make sure to remove all objects and keep the remote control close to the device you want to program.

. Correct code : Another reason your universal remote control may fail is if you are using the wrong code. Fortunately, this site has a list of codes for all of your remote control devices. For most devices, we have listed more than one code. If a code doesn't work, just copy the following code and try again.

. Drums: If there is no battery in your universal remote or the battery is bad, it will not work. Check the battery box of your remote control to make sure the batteries are installed correctly. Also, make sure the batteries are not wet, because that is a sign of damage.

Leave a Reply

Your email address will not be published. Required fields are marked *

Go up