Magnavox TV Converter Box Remote Control Codes

Do you need the remote control codes for the Magnavox TV converter box? This position has you covered on that. With the Magnavox converter box, you can have access to the digital content of your analog TV. A mini guide on how to connect a universal remote to your converter box will be provided in the last part of this post.

Magnavox Converter Box 5 Digit Codes

  • 31268
  • 31506
  • 30503
  • 31354
  • 30539
  • 01563
  • 51563
  • 30675
  • 30821
  • 30675

Magnavox Converter Box 4 Digit Codes








Magnavox Converter Box 3 Digit Codes

How to program a universal remote control to TV converter

Step 1. Make sure to turn on the Magnavox converter box that you want to program.

Step 2. Hold your universal remote near the converter box.

Step 3. Press the «SETUP» button on your remote control.

Step 4. Press and hold the “SAT-CBL-DTC” button on the remote control. The remote enters programming mode when the button is pressed.

Step 5. Enter any of the codes listed earlier in this post using the number button on your remote control.

Step 6. Press the «OK» button to save the code you have entered.

Step 7. Try any of the function buttons on your remote. If it works, then you have the correct process. If not, repeat steps 3 and 4 and try another code until you get the correct code.

Frequent questions

What is a digital converter box?

A digital converter box is a digital box that helps you access the digital content of an analog television.

Can I use any remote control on my digital power converter box?

Also reads remote codes from disk network

Yes, as long as it is a universal remote control.

Similar Posts

Leave a Reply

Your email address will not be published.