MAGNAVOX DVD Player Remote Control Codes

MAGNAVOX is one of the most popular DVD player brands on the market. Normally, a MAGNAVOX DVD player comes with a remote control. But if for some reason you lose the remote control of your MAGNAVOX DVD player or it breaks down, you can use a universal remote control to program your DVD.

To use a universal remote control to program your MAGNAVOX DVD player, you need the MAGNAVOX DVD player remote control codes. This post describes the codes below. There are a number of remote codes for MAGNAVOX DVD Player below. More than one code has been provided for each device. So if one of the codes doesn’t work, please try another code. The code is generally a 4 digit number.

After obtaining the code, you need to know how to sync your universal remote to work with your MAGNAVOX DVD before you can use the code. The guide on how to program a MAGNAVOX DVD with a universal remote control has also been described below.

How to Program Universal Remote Control for MAGNAVOX DVD Player

Step 1 : Switch on your MAGNAVOX DVD set. Check that the DTA is turned on and that it is installed correctly.

Also reads remote control codes for Panasonic DVD

Step 2: Hold your DVD universal remote control to face the device yourself
they want to program.

Step 3: Find the option “PROG” on your universal Hold the button until the small LED light turns on on the remote control. Press the button “INFO” .

Step 4: If you take the first three steps correctly, you will notice that the small LED light continues to flash.

Also read the remote control codes on the Insignia DVD

Step 5: Find the correct code below that applies to your device and enter. Your DVD will show “Success” once you get the correct code code. If not, try another code. On the other hand, your DVD will show “I’m sorry” if you enter a wrong code. Repeat the process with other code.

Step 6: Press any of the function keys on your remote control. If it works, that means… and you have the right steps. If it doesn’t work, repeat the steps and try another code.

3-digit codes for the MAGNAVOX DVD player remote control

MAGNAVOX DVD player remote control 4-digit codes

  • 0408
  • 0456
  • 0915
  • 0918
  • 0979
  • 0980
  • 0914
  • 0969

How to set the universal remote control codes for MAGNAVOX DVD (alternative method)

The first method to program your universe… to your MAGNAVOX DVD has been explained above. If the method works, you can make use of this alternative method.

Step 1: Find the PROG button on your extraction control and press until you see a small LED light.

Step 2: Choose the option «DVD»

Step 3: Find the correct code for the MAGNAVOX DVD above and enter it in the code space.

Step 4: If the light turns off when you enter the code, it shows that you have the correct code.

How to check if a MAGNAVOX remote control is a Universal Remote

Some DVDs The controls that come with some MAGNAVOX DVDs are universal controls. This means that you can use the remote control to power other devices besides the MAGNAVOX DVD. To check if your MAGNAVOX remote is a universal remote, check if it has the “Set” and “Mode options.” If it does, it is a universal remote.

Also reads remote control codes from Sharp DVDs

If you… have any code that is not included in these, please help us add it to the comment box. We will greatly appreciate it.

Check out other categories to find universal remote control codes for different brands of your gadgets.