How to program a Zenith universal remote
The Zenith Universal remote is one of the best universal remote control brands out there. With the Zenith Universal Remote, you can sync it up and use it to control different devices at the same time. So instead of switching between multiple knobs when you want to change the volume on your TV and DVD player, you can use the Zenith universal remote to do so. Most universal remote controls come with the option "Code Search" .
Fortunately, the Zenith remote control also comes with this feature. This means that you can program your Zenith remote with the code search option or manually with the correct codes. Either way, this post covers the two methods for syncing a Zenith remote to any device. The good news is that you can do it in minutes by following the steps below.
How to Program a Zenith Universal Remote without the Search Code Option
Step 1. Make sure to turn on the device you want to pair the universal remote with.
Step 2. Hold the Zenith remote to look at the device you want… to program.
Step 3. Press and hold the button "Code Search" on the remote control until the small LED light on the remote control lights up.
Step 4. The Zenith remote control has the following options, SAT, TAXI, TV, DVD, AUX. Find the button that best suits your device and press the… button.
Step 5. The next step is to find the universal code that fits your device. The Zenith universal remote code can be in the form of 3, 4 or 5 digits. This post describes all the remote codes of the Zenith Universal. You can also use any of the 3-digit codes listed below.
Also read how to program a Samsung remote control into a DVD player
Step 6. Once you find the correct code, enter it. The little LED light will turn off once you enter the correct code.
Step 7. Test your remote control by pressing any button. It could be the volume or the power button. Once your device responds to it, Voila. You have successfully programmed your Zenith universal remote control.
How to Program a Zenith Universal Remote with the Search Code Option
Step 1. Make sure to turn on the device you want to pair the universal remote with.
Step 2. Hold the Zenith remote to look at the device you want… to program.
Step 3. Press and hold the button "Code Search" on the remote control until the small LED light on the remote control turns on.
Step 4. The Zenith remote control has the following options, SAT, TAXI, TV, DVD, AUX. Find the button that best suits your device and press the… button.
Step 5. Press the channel The Up button or the Power button to search the database of codes programmed in the remote code. You may have to continue pressing either button until the remote finds the correct code from the database of programmed codes.
Step 6. Once the correct code appears, press the button. Silence to save the code.
Step 7. To go back to a previous code, use the button Channel Down .
Universal Remote Zenith 3 Digits Codes
Craig
805, 906
Daewoo
002, 102, 110, 203, 214, 221, 303, 311, 314
Emerson
002, 003, 004, 005, 006, 014, 104, 105
Fisher
506, 606, 619, 902
Fujitsu
206
Also read how to program a Jumbo universal remote
Funai
206, 805, 906
GE
002, 007, 018, 107, 310, 318, 502, 601, 719, 803
Goldstar
002, 102, 117, 207, 217, 307, 502, 713, 818, 916
Hitachi
002, 016, 116, 218, 310, 315, 415, 502, 507, 516, 619
JVC
007, 108, 208, 308, 417, 502, 510, 617, 606, 702, 902
Magnavox
002, 008, 109, 118, 209, 309, 402, 408, 502, 508, 510
Memorex
102, 502, 506, 601, 701
Mitsubishi
002, 102, 114, 206, 502, 509, 510, 619, 709, 803
Panasonic
017, 516, 618, 807, 901
Philips
002, 009, 109, 202, 209, 221, 310, 402, 408, 502, 508
Proscan
601, 719
RCA
002, 102, 211, 302, 320, 402, 406, 411, 502, 511, 514
Samsung
002, 102, 103, 112, 212, 502, 512, 702, 818, 908
Sansui
215
Sanyo
002, 312, 412, 506, 619, 902
Sharp
002, 013, 111, 502, 712, 812, 813, 918
Sony
202, 801
Sylvania
002, 009, 109, 117, 209, 309, 402, 408, 502, 508, 717
Symphonic
117, 520, 904, 906
Toshiba
112, 313, 413, 506, 510, 512, 902
Zenith
008, 117, 311, 405, 407, 512, 601, 701, 713, 916
Leave a Reply