How to program a remote control for Samsung TV

A remote control for a Samsung TV is one of the most important accessories for your devices. But for you to be able to operate your TV with the Samsung remote control, you need to sync the remote with your TV. Without it, you may not be able to use the remote as you wish. Do not worry. The process of programming the Samsung remote control to your TV is not as complicated as it sounds. The whole process is described in detail in this post.

How to program a TV remote control Samsung

Step 1. Unlike most remote controls that require you to turn on the TV you want to sync, for the Samsung remote, you need to turn off the TV. Don’t worry, your TV will still receive the signal to sync from the remote control.

Step 2. Hold your Samsung remote control to watch the television you want to program.

Step 3. Find the button “TV” on your remote control. Hold down the button. A signal will be sent to your TV to resume the syncing process.

Step 4. There is a small hole in the remote control that is for “Set”. Take a toothpick or other tiny fine-tipped object and press the jagged “Set” button.

Situs Judi Slot Online Gampang Menang 2021

Slot Paling Gacor

Situs Judi Slot Online Resmi

Judi Slot Terbaru

Situs Slot Terbaru

Situs Slot Gacor

Slot Gacor Hari Ini

Game Slot Gacor

Step 5. Find the correct code for your TV and enter it using the numeric keypad. Check this post to get the codes for Samsung TV. If any of the codes don’t work, please try other codes.

Step 6. Press the “Power” button to turn on the TV. If your TV turns on, it means that you have done the whole process well. If it doesn’t light up, it may mean you have the wrong code. Please try the process again from step 3.

Also read how to program a BLACKWEB universal remote control

How to Program a Samsung Remote for Your DVD

Step 1. Make sure to turn on the device you want to pair with the universal remote.

Step 2. Keep your face towards the device you want to program.

Step 3. Find the power button on the remote control and press it to adapt it to the device you want to pair. Since you want to sync with your DVD, press the DVD option on the remote control.

Step 4. Find the codes for the Samsung TV here and enter them using the number button on the remote control. When you get the correct code, the small LED light will blink twice after you enter the last digit.

Step 5. Find and press the button Β«PowerΒ» at the top of the controller. If your device shuts down, Voila. You have successfully programmed your Samsung remote control.

How to program a TV remote control Samsung by cable

Step 1. Make sure to turn on the device you want to pair with the universal remote.

Step 2. Stay on your to face the device you want to program.

Step 3. Find the power button on the remote control and press it to adapt it to the device you want to pair. Since you want to sync with your CBL, press the CBL option on the remote control.

Step 4. Find the codes for the Samsung Remote here and enter them using the number button on the remote control. When you get the correct code, the small LED light will blink twice after you enter the last digit.

Step 5. Find and press the button Β«PowerΒ» at the top of the controller.

Samsung TV remote codes

You can use any of the codes here to program your Samsung remote control

  • 0178
  • 0030
  • 0056
  • 0019
  • 0587
  • 0060
  • 0093

Below is a list of all Samsung remote control codes that will be used with ALL Samsung TVs. These codes can be used with all universal remotes if your remote requires a 3-, 4- or 5-digit code. Find all the 3, 4 and 5 digit universal remote control codes for Samsung TVs below.

Samsung TV remote control codes

These remote control codes work when a specific remote control is programmed into your Samsung TV. When programming a universal remote control for a SAMSUNG TV, follow the instructions in the included manual.

When it is time to enter the REMOTE CODE, use the list below to find the correct remote code used to make the remote control operate your SAMSUNG TV.

NOTE: You may need to repeat the process several times to find the correct remote code …

Samsung 4 digit universal TV remote control codes:

  • 0812
  • 2051
  • 3131
  • 1458
  • 0618
  • 0556
  • 1312
  • 2103
  • 0037
  • 0178
  • 0644
  • 0587
  • 0093
  • 1619
  • 2137
  • 1249
  • 1630
  • 1584
  • 1235
  • 0264
  • 0208
  • 0226
  • 1506
  • 1744
  • 0009
  • 0370

Samsung 5 digit Universal TV remote codes:

  • 10650
  • 10814
  • 12051
  • 11632
  • 10702
  • 13993
  • 10060
  • 11959
  • 10766
  • 10812
  • 10178
  • 10030
  • 11575
  • 11060
  • 10587
  • 10482
  • 10427
  • 10408
  • 10329
  • 10217
  • 10056
  • 10032

Philips Universal Remote:
Samsung TV Codes:

  • 0112
  • 0309
  • 0209
  • 0512
  • 0302
  • 0502
  • 0002
  • 0102
  • 0110
  • 0818
  • 0895
  • 0437
  • 0802
  • 0103
  • 0609
  • 0012
  • 0212

One-For-All Universal Remote Control:
Samsung TV codes:

  • 0587
  • 0178
  • 0093
  • 0060
  • 0030
  • 0019
  • 0056

GE Universal Remote
Samsung TV codes:

  • 0105
  • 0077
  • 0076
  • 0109
  • 0007
  • 0009
  • 0004
  • 0005
  • 0085
  • 0172
  • 0942
  • 0358
  • 0012
  • 0015
  • 0080
  • 0104
  • 0106

RCA Universal Remote
Samsung TV 4-digit codes:

  • 1004
  • 1009
  • 1012
  • 1013
  • 1014
  • 1015
  • 1025
  • 1046
  • 1056
  • 1065
  • 1069
  • 1078
  • 1083
  • 1102
  • 1103
  • 1104
  • 1123
  • 1124
  • 1194
  • 1205
  • 1207

RCA Universal Remote
Samsung TV 5-digit codes:

  • 10812
  • 10054
  • 10060
  • 10702
  • 10178
  • 10030
  • 10056
  • 10650
  • 10766
  • 10814
  • 11060

Innovage Jumbo 3-digit SAMSUNG remote codes:

  • 004
  • 005
  • 009
  • 015
  • 104
  • 105
  • 106
  • 109
  • 172

Samsung 4 digit Universal TV remote codes:

  • 523
  • 526
  • 516
  • 505
  • 738
  • 506
  • 667
  • 696
  • 680
  • 647
  • 601
  • 794
  • 652
  • 573
  • 507
  • 265
  • 140
  • 627
  • 858
  • 520
  • 611
  • 654
  • 564
  • 833
  • 655
  • 989